I also added a small switch into the Kensignton lock port that disconnects the PWM line to both fans which will run them 100%. (I also applied Kapton tape to the mobo under the GPU cooling section of the cooler to prevent flexing from causing a short) The PWM control for fan 2 can be bridged off the PWM control from fan 1, power and ground can be gotten from a nearby USB port. The stock cooler on the A315-41 was woefully insufficient for continuous load of any sort.ġ is resolved using a cTDP utility like Ryzen Controller and raising the throttle temp to AMD's spec or near it ~90c.Ģ is resolved with the same utility, but will need to play with the power and time limits for boost.ģ was resolved by installing the Nitro 5's (AN515-42) MUCH beefier cooler using Liquid Metal TIM after masking and sealing the CPU package w/ clear nailpolish. As OP discovered, there's a limited boost period (and current/power over time limits) to control thermals and limit battery consumptionģrd. Acer's AMD Ryzen APU laptops of this gen, including the Nitro 5 throttle/stop boosting 80c by defaultĢnd. I don't know about your exact laptop but I 'rebuilt' and modded an Acer Aspire A315-41-R98U recently for a friend of mine.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |